Think Pumps – Think SpringerPhone: 866-777-6060||
Search
Menu
  • Submersible Drainage/Sump Utility Pump Model 5792-95

    AMT Submersible Sump Pumps are designed for many applications including sump pits, drainage pits, overflow tanks, basements, dewatering, excavation, grain elevators, construction drainage, cooling towers and other applications requiring clear water removal. AMT submersible pumps (except SS model 5780-98) include automatic float switch, thermal overload protector and suction screen.

    AMT Submersible Utility Pumps are reliable, cost effective, low maintenance and many are readily available "Off-the-shelf" for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.

    • Stainless Steel, Cast Iron and Plastic Construction
    • Built-in Thermal Protection
    • Triplex Seal System; Double Mechanical Seals Plus Shaft Seal
    • Automatic Float Switch Included (Except SS Model 5780-98)
    • 115 VAC UL/SJT Cord with 3 Prong Plug
    • U.L./CSA Listed
    • 1/8 to 1/2 HP
    • 1" to 2" NPT Port Sizes
    • Max. Temperature 104ºF
    • Clog Resistant Impellers

  • Submersible Shredder Sewage Pump

    AMT Submersible Shredder Sewage pumps feature an enhanced spiral shredder mechanism plate and carbide tipped impeller to prevent clogging and reduce maintenance when cutting through stringy, fibrous and sludge type waste. Applications include sewage pumping stations, septic tanks, sewage treatment plants, dirty water drainage, flood and emergency. Motors are rated continuous duty and single phase models have thermal overload protection.

    AMT Submersible Shredder Sewage Pumps are reliable, cost effective, low maintenance and many are readily available "Off-the-shelf" for fast 24 hour shipment. Minimum liquid requirements must be above 85%. Failure to do so may cause pump damage and void warranty. For use with non-flammable liquids compatible with pump component materials.

    • Cast Iron with Stainless Steel Motor Housing
    • Carbide Tipped Shredder Impellers
    • Spiral Shredder Mechanism Plate Surface Hardened for Enhanced Cutting Ability
    • Triplex Seal System: Double Mechanical Seals Plus Shaft Seal
    • Silicon Carbide Lower Seal
    • 115, 230 or 460 VAC at 60 Hz Available
    • Single or 3 Phase Available
    • 2", 3" or 4" NPT
    • 1 to 5 Horsepower
    • Max Temperature 104ºF
    • UL/CSA Listed

  • Submersible Contractor Pump

    AMT Submersible Contractor Pumps are intended for use in residential, commercial and industrial settings. Applications include: Construction sites, waste water, storm water, farming, irrigation, excavation, mining, marine, basement and other general drainage applications involving sediment laden liquids with solids up to 3/8" in diameter.

    Self-cleaning impeller featuring abrasion-resistant high chromium steel construction for durability. Pumps have a 3450 RPM electric motor fitted with an unfinished power cord that requires field wiring (no controls are supplied). Motors are rated continuous duty and single phase models have thermal overload protection.

    AMT Submersible Contractor Pumps are reliable, cost effective, low maintenance and many are readily available "Off-the-shelf" for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.

    • Cast Iron with Stainless Steel Motor Housing
    • Hi Chromium (HCr) Steel Impeller and Cover for Wear Resistance and Durability
    • Superior Motor Design for Quiet, Low Noise Operation
    • Silicon Carbide Mechanical Seals Plus Shaft Seal
    • 3" and 4" Models Feature Companion Flange Connection
    • 230 VAC at 60 Hz
    • Single or 3 Phase Available
    • 2", 3" or 4" NPT
    • 1 to 7.5 Horsepower
    • Max. Temperature 104ºF
    • UL/CSA Listed

  • AMT 5890-DC 12 VDC Battery Powered Submersible Pump

    The AMT Submersible 12 Volt DC pump is designed for use in dewatering applications where limited or no electricity is present and for emergency back-up during power failure. The pump weighs 33 pounds and is constructed of aluminum with cast iron impeller. Unit comes assembled with 30 foot power cord, which has battery clips for easy attachment to 12 volt battery.


    Features:

    • Aluminum Construction with Cast Iron Impeller
    • 1/3 HP, 12 Volt DC 30 Amp Motor
    • 30 Ft. Insulated (PVC) Conductor Cable with Battery Clips
    • 1-1/2"" FNPT Discharge
    • Buna-N Mechanical Seal with Carbon and Ceramic Faces
    • Operates Approximately 60 Minutes on Fully Charged 55 Amp-Hour Battery
    • Built-In Carry Handle
    • Steel Strainer Built into Pump
    • Overload Protection
    • On/Off Switch
    • Maximum Flow 42 GPM
    • Maximum Temperature 104º F

^