(9)
AMT Cast Iron Sewage/Trash pumps are designed for trouble free and economical handling of solids laden liquids and slurries. Pumps are available in three NPT port sizes; 2"", 3"" and 4"". Cast iron construction with 2 vane Stainless Steel self-cleaning impellers, Silicon Carbide mechanical seals for abrasion resistance and Buna-N O-rings and check valves. Built-in check valve allows pump to reprime automatically in an open system, without a foot valve. The solids handling capabilities of the pumps make them ideally suited for a variety of industrial applications including: sewage treatment, canneries, chemical processing, wineries, tanneries, meat packing, breweries, pulp, wood chips, process water, sludge and slime, waste water, white ...
AMT Bronze Self-priming Centrifugal pumps are designed for use with swimming pools, hot tubs and spas. All models are U.L. Listed 1081. When used with Model 4530-99, ABS Strainer Basket, pumps will self-prime to 6 ft. NOTE: Strainer Baskets must be ordered separately. All models are fitted with self-cleaning bronze impellers. Units feature pull-from-rear design for easy servicing without removing piping.
AMT Bronze Self-priming Centrifugal pumps are reliable, cost effective and low maintenance. For use with non-flammable liquids compatible with pump component materials.
(2)
The AMT Model 3670-94 Naval Bronze Straight Centrifugal pump is designed for low pressure salt water wash down and recirculating applications. The pump has been sized for salt water (1.03 specific gravity) and features provisions for the installation of a seal wash, front drain plug and pull-from-rear design. The unit features Buna-N O-ring casing seal and Buna-N mechanical shaft seal. The unit is driven by a 1/8 HP capacitor start induction motor (TEFC) with ball bearings and a Stainless Steel shaft. On/off switch and line cord are standard.
The AMT Model 4860-97 Bronze Centrifugal pump is compact and designed for use in general dewatering, salt water applications including live well tanks, circulation and chemical transfer. Buna-N ...
These AMT commercial/industrial centrifugal pumps are non-self-priming (gravity feed) units designed to handle high-pressure low flow liquid transfer applications where no suction lift is required. Typical installations include: hot and chilled water, boiler feed, condensate return, irrigation, high pressure washdown, booster service, and fire protection/sprinkler systems—often referred to as a Jockey Pump. These pumps have NOT been investigated for use in potable (drinking) water systems.
304 Series Stainless Steel Components with Teflon® Wear Rings
Cast Iron Base & Adapter
1" NPT Cast Iron Flanges
NEMA 56C Dual Cycle 50/60 Hz, Single or Three Phase TEFC Motors
These AMT commercial/industrial centrifugal pumps are non-self-priming (gravity feed) units designed to handle high-pressure low flow liquid transfer applications where no suction lift is required. Typical installations include: hot and chilled water, boiler feed, condensate return, irrigation, high pressure washdown, booster service, and fire protection/sprinkler systems—often referred to as a Jockey Pump. These pumps have NOT been investigated for use in potable (drinking) water systems.
304 Series Stainless Steel Components with Teflon® Wear Rings
Cast Iron Base & Adapter
1? NPT Cast Iron Flanges
NEMA 56C or 182/4 TC Dual Cycle 50/60 Hz, Single or Three Phase TEFC ...
