2 HP Cast Iron Straight Centrifugal Pump

AMT® Straight Centrifugal Pumps are designed for continuous-duty OEM, Industrial/Commercial and Processing applications including dirty water circulation, liquids containing particles and solids up to 1/8” diameter for chemical processing and liquid transfer. These straight centrifugal heavy duty industrial pumps are available in a variety of Construction and seal materials to meet your specification. Pull from rear design for easy servicing without disturbing piping, in addition to a two piece

Unit of Measure

Specifications | Curves | Dimensions

Specifications

Manufacturer	N/A American Machine and Tool Company
Power	N/A 2 hp
Voltage (AC) at 60 Hz¹	N/A 115-208/230 VAC/60 Hz V
Full Load Current	N/A 28/14 A
Inlet Size	N/A 1.5 NPT in
Max. Flow Rate	N/A 156 gpm
Temperature	N/A 200 ºF
Motor Frame	N/A 56J
Weight	N/A 29.48 Kilogram29.48 kg65 lbs
Length	N/A 15 Inch38.86 Centimeter1.28 ft15 in0.3886 m388.62 mm
Width	N/A 10 Inch10 in0.2540 m254.00 mm
Height	N/A 9 in226.06 mm
M.O.C	N/A Cast Iron
N/A 300 Series Investment Cast Stainless Steel and Cast Iron Construction with Stainless Steel Impeller Viton®/SIC Mechanical Seal and VIton O-Rings 2 Piece Impeller allows for Easy Servicing and Cleanout Optional EPR/EDPM Seals Available Discharge Port Rotates in 90° Increments 502 Series: 1-1/4" x 1" Ports 503 Series: 1-1/2" x 1-1/4" Ports (3) Front Drain Plugs Maximum Flow 156 GPM Maximum Head 127 Ft. (55 PSI)
SKU	N/A AT503295SP

Curves

Performance Curves

Dimensions

¹ 3-Phase motors can also operate on 50 Hz. (This will change Full Load Amps, Service Factor and RPM)

Specifications

Manufacturer

Power

Full Load Current

Inlet Size

Max. Flow Rate

Temperature

Motor Frame

Weight

Length

Width

Height

M.O.C

SKU

Curves

Dimensions