Springer Pumps, LLC.
Mailing: PO Box 269, Telford, PA 18969
Shipping: 861 Tech Drive, Telford, PA 18969

Int'l: 267-404-2910
Toll Free: 866-777-6060
Toll Free Fax: 866-777-6383
Email: info@springerpumps.com
Website: www.springerpumps.com
Print Back
AMT Cast Iron Sewage/Trash pumps are designed for trouble free and economical handling of solids laden liquids and slurries. Pumps are available in three NPT port sizes; 2", 3" and 4". Cast iron construction with 2 vane Stainless Steel self-cleaning impellers, Silicon Carbide mechanical seals for abrasion resistance and Buna-N O-rings and check valves. Built-in check valve allows pump to reprime automatically in an open system, without a foot valve. The solids handling capabilities of the pumps make them ideally suited for a variety of industrial applications including: sewage treatment, canneries, chemical processing, wineries, tanneries, meat packing, breweries, pulp, wood chips, process water, sludge and slime, waste water, white water and other applications.

AMT Sewage/Trash pumps will easily handle liquids containing sewage, stone, sticks, mud, and other solids. Minimum liquid requirement must be above 85%. Failure to do so may damage pump and void warranty. These pumps are reliable, cost effective and low maintenance. Many are readily available "Off-the-Shelf" for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.
  • Cast Iron Construction
  • Silicon Carbide/viton® Mechanical Seal
  • 2", 3" & 4" NPT Port Sizes
  • Self-Priming up to 20 ft.
  • Maximum Temperature 180º F
  • Maximum Working Pressure 150 PSI
  • Stainless Steel Semi-open, Clog Resistant Impeller
  • Buna-N Check Valve & O-Ring
  • Removable Cast Iron Volute/ Wear plate
  • Easy Cleanout Design
  • Pull-from-Rear Design
  • 3" & 4" Models Feature Front Cleanout
  • Available with 3 to 15 HP Totally Enclosed Fan Cooled (TEFC) Electric Motors
  • Single and Three Phase, 3450 RPM Motors
  • Seal Flush Port Provided on 5 HP and Larger
  • Optional Mounting Base Available
Unit of Measure

Specifications

Manufacturer

 N/A American Machine and Tool Company

Model #

 N/A 316A-95

Curve

 N/A E

Phase

 N/A 3

Enclosure Rating

 N/A TEFC

Motor Frame

 N/A 56J
Voltage at 60 Hz1 N/A 230/460 V

Full Load Current

 N/A 8/4 A

Solids Handling

 N/A 1 in

Power

 N/A 3 hp

Inlet Size

 N/A 2 in

Porting Position

 N/A 2 in

Width

 N/A 9 in236.22 mm

Seal Material

 N/A Silicon Carbide/Viton

Self-Priming

 N/A 20 ft

Temperature

 N/A 180 ºF

RPM

 N/A 3450 rpm

N/A Electric supply for ALL motors must be within ±10% of nameplate voltage rating

Weight

 N/A 39.46 87 87 lbs

Length

 N/A 20 in505.46 mm

Height

 N/A 9 in223.52 mm

SKU

 N/A AT316A95SP

Customs Code

 N/A HTS Code 8413702015

Features

Features

 N/A
  • Cast Iron Construction for Abrasive Resistance and Durability
  • Self-cleaning Stainless Steel Impellers Resist Clogging and Wear
  • Pull-from-Rear Design Permits Clean Out and Repair Without Removing Piping
  • Silicon Carbide/Viton Mechanical Seal
  • Built in Buna-N Check Valve
  • Buna-N O-Ring Casing Seal Reusable After Clean Out Maintenance
  • Replaceable Cast Iron Volute/Wear plate Designed for Solids Handling
  • Motor Includes Stainless Steel Shaft or Stainless Steel Shaft Sleeve
  • 3" & 4" Models Feature Front Cleanout
  • Available with 3 to 15 HP Totally Enclosed Fan Cooled (TEFC) Electric Motors
  • Single and Three Phase, 3450 RPM Motors
  • Optional Mounting Base Available for 184/215 JM Frames
  • 1 3-Phase motors can operate on 50 Hz. (This will change Full Load Amps, Service Factor, RPM and Priming Capabilities)