Springer Pumps, LLC.
Mailing: PO Box 269, Telford, PA 18969
Shipping: 861 Tech Drive, Telford, PA 18969

Int'l: 267-404-2910
Toll Free: 866-777-6060
Toll Free Fax: 866-777-6383
Email: info@springerpumps.com
Website: www.springerpumps.com
Print Back
Recommended for transferring
Thin to high viscosity, even pasty, still free flowing substances.

Seal Types
Type F 550 S with mechanical seal or Type F 550 SB with stuffing box.

Available Drive Motors
Three-phase electric or compressed air motors. Three-phase motors of 0.75 or 1.1 kW, with a speed of 930 or 700 rpm. For high viscosity, pasty substances a motor of 1.1 kW is required with a recommended speed of 700 rpm for viscosities exceeding 50.000 mPas (cP), because of the low velocity of such products. A speed of 930 rpm may be used if the product is still flowing or if a follow-on plate would support the continuous flow of the product to the pump inlet.
For viscosities up to 25.000 mPas (cP) a motor of 0.75 kW and 930 rpm will be sufficient.
On compressed air motors of 0.5 to 1.8 kW, the speed may be controlled by a valve in the air supply line.
With higher viscosities delivery rate will be lower, depending on the velocity of the fluid.
Values ±10% at 930 rpm. Delivery rate depends on the velocity of the fluid.

Scope of Supply
A complete eccentric worm-drive pump consists of: drive motor, pump, stator and hose connection.

F-550-S
Unit of Measure
Items F-550-S
10-55025507
10-55025507
Price QUOTE
F-550-S
10-55025510
10-55025510
Price QUOTE
F-550-S
10-55025512
10-55025512
Price QUOTE
F-550-S
10-55025652
10-55025652
Price QUOTE
F-550-S
10-55025654
10-55025654
Price QUOTE
Model # N/A F 550 S-50/21 N/A F 550 S-50/21 N/A F 550 S-50/21 N/A F 550 S-54/26 N/A F 550 S-54/26
Max. Flow Rate N/A 30 lpm N/A 30 lpm N/A 30 lpm N/A 50 lpm N/A 50 lpm
WETTED M.O.C. N/A Bearing Flange in Aluminum; Outer Tube, Torsion Shaft and Eccentric Worm in Stainless Steel 316 Ti
Explosion Proof Rating N/A Not approved for transferring high flammability liquids in Zone N/A Not approved for transferring high flammability liquids in Zone N/A Not approved for transferring high flammability liquids in Zone N/A N/A
Stator Material N/A Not included with the pump N/A Not included with the pump N/A Not included with the pump N/A N/A
Outer Diameter N/A 50 mm N/A 50 mm N/A 50 mm N/A 54 mm N/A 54 mm
Outlet Size N/A 1 1/2 in N/A 1 1/2 in N/A 1 1/2 in N/A N/A