Item # 3.15E-96, 315E-98 On Springer Pumps, LLC

Registered Users – Sign In

		\| Shipping \| Tax \| Terms
Shopping Cart	0 Items

Request for Quote	0 Items


All Categories > Manufacturers Index > AMT Centrifugal, Diaphragm, and Drum Pumps > Centrifugal Pumps > Heavy Duty Straight Centrifugal Pumps > Item # 3.15E-96


	Item # 3.15E-96, 315E-98
	Unit Price QUOTE

larger image

AMT Heavy Duty Straight Centrifugal pumps are suited for liquid and chemical transfer, heating and cooling, recirculation, booster service and other industrial applications. Stainless Steel units are especially effective in applications where rust and/or corrosion can develop in systems. Semi open impeller features self-cleaning ability that makes the unit useful in applications involving muddy or dirty liquids, as well as clean, clear fluids. Discharge position can be adjusted in 90º increments, with vent and drain plugs for all positions. Type 21 mechanical seal and O-ring casing seal. Pumps are close coupled to Totally Enclosed Fan Cooled motors (TEFC) Pumps are not self-priming and require flooded suction.

AMT Heavy Duty Straight Centrifugal pumps are reliable, cost effective and low maintenance. Many are readily available "Off-the-Shelf" for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.

Viton® is a registered trademark of E.I. DuPont

Available in: 300 Series Investment Cast Stainless Steel, Cast Bronze and Cast Iron with Stainless Steel Impeller Construction
2 HP to 15 HP NEMA Motors, Single and Three Phase
Type 21 Buna-N Mechanical Seal and O-Ring on Cast Iron Models
Type 21 Viton® Mechanical Seal and O-Ring on Stainless Steel and Bronze Models
Optional Silicon Carbide Seals Available
Optional Mounting Base Available
High Flow and High Head Designs
Flanged or NPT Connections
Maximum Temperature
Viton®: 200ºF
Buna-N: 180ºF
Front Drain Plugs Located 90º Apart
Maximum Head 194 Ft. (100 PSI)
Maximum Flow 500 GPM
Maximum Working Pressure 150 PSI

Specifications

Manufacturer

American Machine and Tool Company

Model #

315E-98

Curve

Power

5 hp

Phase

Motor Frame

184JM

Enclosure Rating

TEFC

Voltage at 60 Hz¹

230 V

Full Load Current

16 A

Inlet Size

2 in

Porting Position

1 1/2 in

Temperature

200 ºF

Max. Flow Rate

500 gpm

Seal Material

Viton®

Installed Options

Seal Wash Installed: 1/8" NPT access and rubber hose w/ 1/2" NPT male thread end (A220-90)($259.00)
Silicon Carbide/Viton Seal Installed (315X-300-VS)($174.00)
Silicon Carbide/Viton Seal Installed (424X-300-VS)($174.00)
Silicon Carbide/Viton Seal Installed (425X-300-VS)($174.00)
Silicon Carbide/Viton Seal Installed (426X-300-VS)($174.00)

Electric supply for ALL motors must be within ±10% of nameplate voltage rating

Weight

140
63.50
140 lbs

Length

24 in
614.68 mm

Width

14 in
353.06 mm

Height

10 in
243.84 mm

M.O.C

Stainless Steel

Stainless Steel, Naval Bronze & Cast Iron Construction
Buna-N or Viton® Mechanical Seal and O-Rings depending on Models, Optional Silicon Carbide Available
Stainless Steel Hardware
NEMA TEFC Single and Three Phase Motors Depending on the Model
Stainless Steel Motor Shaft
Optional Mounting Base Available for 182/184/215 JM Frames
Self-cleaning Impeller
Discharge Rotates in 90º Increments
Maximum Working Pressure to 150 PSI
Max. Temperature 200ºF (Viton®), 180ºF (Buna-N)
Optional Seal Wash Port and Hose is Available on All Models
"Off-the-Shelf" Availability for Many Models
Pedestal Version Models Available for Frame Models 145/182/184JM

SKU

AT315E98SP

¹ 3-Phase motors can also operate on 50 Hz. (This will change the Full Load Amps, Service Factor and RPM)

MORE IMAGES


	· AMT Dimensional Drawing

DOWNLOADS


		AMT Heavy Duty Straight Centrifugal Pumps Brochure & Spec Sheet (PDF, 582KB)

		AMT STE-16 Spec Sheet, Heavy Duty StraightCentrifugal Pumps (PDF, 0KB)

		AMT 3150-257-00 Owners Manual, CENTRIFUGAL PUMPS (PDF, 0KB)

Installed Seal Options for Heavy Duty Straight Centrifugals



	Installed Seal Options for Heavy Duty Straight Centrifugal

Item # 3.15E-96, 315E-98