Think Pumps ~ Think SpringerPhone: 866-777-6060|| |
Search
Menu
The AMT line of Engine Driven Solids Handling pumps offers an upgraded debris handling capability in wear resistant Cast Iron construction. Applications include high volume liquid transfer, irrigation, commercial draining and construction. All these models feature removable/replaceable Cast Iron wear plate/volute, clog resistant impellers and/or wear plates to ensure a long life for the complete pump. Dual volute design reduces radial load on engines.

AMT Engine Driven Solids Handling pumps are reliable, cost effective and low maintenance. Many are readily available "Off-the-Shelf" for fast 24 hour shipment. For use with non-flammable liquids which are compatible with pump component materials.
  • Heavy duty cast iron construction
  • Buna or Viton® mechanical seal
  • 1-1/2" to 3" NPT port sizes
  • Self-priming up to 20 ft.
  • Semi-open, clog resistant impellers
  • Engine Options: Honda, B&S or Yanmar
  • Solids handling up to 3/4" diameter
  • Electric start options available
  • Pumps include heavy duty steel roll frames
  • Wheel kits available with semi-pneumatic or pneumatic tires
12V DC Electric Start (battery not included)
Oil Alert Included
Viton® is a registered trademark of DuPont
Unit of Measure

Specifications

Manufacturer

N/A American Machine and Tool Company

Model #

N/A 3390-95

Curve

N/A E

Inlet Size

N/A 3" NPT

Driver

N/A B&S 1350 Series

Seal Material

N/A Buna-N

Run Time

N/A 90 min

Fuel Tank Capacity

N/A 4 qt

Solids Handling

N/A 3/4 in

Self-Priming

N/A 20 ft

Temperature

N/A 180 ºF

Power

N/A 8 hp

Motor Frame

N/A Yes

Installed Options

N/A Silicon Carbide/Viton Seal, Flapper and Gasket Installed (327X-300-VS) ($127.00)Silicon Carbide/Viton Seal, Flapper and Gasket Installed (339X-300-VS) ($127.00)Silicon Carbide/Viton Seal, O-Ring and Flapper Installed (316X-300-VS) ($127.00)

Weight

N/A 140 63.50 137 lbs

Length

N/A 31 in787.40 mm

Width

N/A 23 in571.50 mm

Height

N/A 24 in599.44 mm

SKU

N/A AT339095SP

Customs Code

N/A HTS Code 8413702015

Features

Features

N/A
  • Two NPT Pipe Nipples
  • Viton® or Buna Mechanical Seals
  • Self-primes to 20 ft.
  • Semi-Open, Clog Resistant Cast Iron Impeller
  • Stainless Steel Shaft Sleeve
  • Maximum Temperature 180ºF
  • Maximum Working Pressure 60 PSI
  • Wear Resistant Cast Iron Replaceable Volute/Wear Plate and Impeller
  • Solids Handling Capability
  • Built-in Flapper/Check Valve
^