Springer Pumps, LLC.
Mailing: PO Box 269, Telford, PA 18969
Shipping: 861 Tech Drive, Telford, PA 18969

Int'l: 267-404-2910
Toll Free: 866-777-6060
Toll Free Fax: 866-777-6383
Email: info@springerpumps.com
Website: www.springerpumps.com
Print Back
AMT® 394H-95 Self-Priming Sewage/Trash Pump.

AMT® Cast Iron Sewage/Trash Pumps are designed for trouble free and economical handling of solids laden liquids and slurries. Cast iron construction with two vane stainless steel self-cleaning impellers, silicon carbide mechanical seals for abrasion resistance and Buna-N o-rings and check valves. The built-in check valve allows pump to re-prime automatically in an open system without the foot valve. The solids handling capabilities of the pumps make them ideally suited for a variety of industrial applications including: sewage treatment, canneries, chemical processing, wineries, tanneries, meat packing, breweries, pulp, wood chips, process water, sludge and slime, waste water, white water and other applications. These sewage/trash pump will easily handle liquids containing sewage, stones, sticks, mud and other solids. Buna-N o-ring casing seal is re-usable after clean out maintenance. Self-cleaning stainless steel impeller resists clogging and wear. Front clean-out and additional pull-from-rear design permits clean out and repair without removing piping.

Features:

  • Cast iron construction
  • SiC/SiC seal with Viton® elastomers
  • Stainless steel semi-open, clog resistant impeller
  • Buna-N check valve and o-ring
  • Self-priming to 20 Ft. with built-in check valve
  • Removable cast iron volute/wearplate
  • Easy clean-out design
  • Pull-from-rear design
  • Totally Enclosed Fan Cooled (TEFC) motor
Hazardous Duty/Xplosion Proof motors available from stock ranging from 1 to 10 HP.

Note: Minimum liquid requirement must be above 85% with a maximum of 15% solids. Failure to do so may damage pump & void warranty.

Interchangeable with Grainger Part # 4XX83


* AMT® 394H-95
Identical specs and alternate to AMT® 394B-95
Unit of Measure

Specifications

Manufacturer

N/A American Machine and Tool Company

Model #

N/A 394H-95

Curve

N/A C

Phase

N/A 1

Enclosure Rating

N/A TEFC

Motor Frame

N/A 215JM
Voltage at 60 Hz1 N/A 230 V

Full Load Current

N/A 31 A

Solids Handling

N/A 1 1/2 in

Power

N/A 7.5 hp

Inlet Size

N/A 3 in

Porting Position

N/A 3 in

Width

N/A 16 in393.70 mm

Seal Material

N/A Silicon Carbide/Viton

Self-Priming

N/A 20 ft

Temperature

N/A 180 ºF

RPM

N/A 3450 rpm

N/A Electric supply for ALL motors must be within ±10% of nameplate voltage rating

Weight

N/A 133.81 295 248 lbs

Length

N/A 31 in789.94 mm

Height

N/A 13 in317.5 mm

SKU

N/A AT394H95SP

Customs Code

N/A HTS Code 8413702005

Features

Features

N/A
  • Cast Iron Construction for Abrasive Resistance and Durability
  • Self-cleaning Stainless Steel Impellers Resist Clogging and Wear
  • Pull-from-Rear Design Permits Clean Out and Repair Without Removing Piping
  • Silicon Carbide/Viton Mechanical Seal
  • Built in Buna-N Check Valve
  • Buna-N O-Ring Casing Seal Reusable After Clean Out Maintenance
  • Replaceable Cast Iron Volute/Wear plate Designed for Solids Handling
  • Motor Includes Stainless Steel Shaft or Stainless Steel Shaft Sleeve
  • 3" & 4" Models Feature Front Cleanout
  • Available with 3 to 15 HP Totally Enclosed Fan Cooled (TEFC) Electric Motors
  • Single and Three Phase, 3450 RPM Motors
  • Optional Mounting Base Available for 184/215 JM Frames
  • 1 3-Phase motors can operate on 50 Hz. (This will change Full Load Amps, Service Factor, RPM and Priming Capabilities)