(3) Recommended for transferring Thin to high viscosity, even pasty, still free flowing substances.
Seal Types Type F 550 S with mechanical seal or Type F 550 SB with stuffing box.
Available Drive Motors Three-phase electric or compressed air motors. Three-phase motors of 0.75 or 1.1 kW, with a speed of 930 or 700 rpm. For high viscosity, pasty substances a motor of 1.1 kW is required with a recommended speed of 700 rpm for viscosities exceeding 50.000 mPas (cP), because of the low velocity of such products. A speed of 930 rpm may be used if the product is still flowing or if a follow-on plate would support the continuous flow of the product to the pump inlet. For viscosities up to 25.000 mPas (cP) a ...
Recommended for transferring Thin to high viscosity, even pasty, still free flowing substances.
Seal type Mechanical seal
Available drive motors Three-phase electric motors or compressed air motors
Scope of supply A complete eccentric worm-drive pump consists of: drive motor, pump, stator and hose connection. With higher viscosities delivery rate will be lower, depending on the velocity of the fluid. Values ±10% at 930 rpm. Delivery rate depends on the velocity of the fluid.
(5) Recommended for transferring Thin to medium viscosity liquids up to a maximum viscosity of 30.000 mPas (cP).
Seal type Type F 550 GS with mechanical seal or Type F 550 GSB with stuffing box
Available drive motors Commutator motors or compressed air motors. An infinitely variable speed variator - also available on explosion-proof models - allows the operator to set pump capacity to specific delivery requirements.
Scope of supply A complete eccentric worm-drive pump consists of: drive motor, pump, stator and hose connection.
Recommended for transferring Thin to medium viscosity liquids up to maximum 30.000 mPas (cP).
Seal type Mechanical seal
Available drive motors Commutator motors or compressed air motors. An infinite variable speed variator - also on explosion-proof motors - allows the operator to set pump capacity to specific delivery requirements.
Scope of supply A complete sanitary pump consists of: drive motor, pump, stator and hose connection.
Recommended for transferring Thin to high viscosity substances up to a maximum viscosity of 80,000 mPas (cP).
Seal type Mechanical seal (stuffing box on request).
Available drive motors Single-phase AC motors with capacitor switch or three-phase motors.
Scope of supply A complete eccentric worm-drive pump consists of: drive motor, pump, stator and hose connection. Eccentric worm-drive pumps type F 550 GS6 with planetary gear, without drive motor
The FLUX® F550S is a direct drive progressive cavity pump. The progressive cavity design produces a smooth flow of product with very little product degradation. The direct drive version allows the use of higher horsepower motors enabling the pump to handle viscosities in excess of 100000 cP. Applications include, but are not limited to, polymers, resins, adhesives, silicones and oils. Both pneumatic and electric motors are available.
The FLUX® F55GS is a gear drive progressive cavity pump. The progressive cavity design produces a smooth flow of product with very little product degradation. The gear drive version allows the use of most FLUX® F400 series motors. This pump is capable of handling viscosities to 50000 cP. Applications include, but are not limited to, polymers, resins, adhesives, and oils. Both pneumatic and electric motors are available.
