Item # 316B-95, 2" NPT Sewage/Trash Pump On Springer Pumps, LLC

Registered Users – Sign In

		\| Shipping \| Tax \| Terms
Shopping Cart	0 Items

Request for Quote	0 Items


All Categories > Manufacturers Index > AMT Centrifugal, Diaphragm, and Drum Pumps > Marine/Utility/HVAC Pumps > Cast Iron Sewage & Trash Pumps > Item # 316B-95


	Item # 316B-95, 2" NPT Sewage/Trash Pump
	Unit Price QUOTE

AMT Cast Iron Sewage/Trash pumps are designed for trouble free and economical handling of solids laden liquids and slurries. Pumps are available in three NPT port sizes; 2", 3" and 4". Cast iron construction with 2 vane Stainless Steel self-cleaning impellers, Silicon Carbide mechanical seals for abrasion resistance and Buna-N O-rings and check valves. Built-in check valve allows pump to reprime automatically in an open system, without a foot valve. The solids handling capabilities of the pumps make them ideally suited for a variety of industrial applications including: sewage treatment, canneries, chemical processing, wineries, tanneries, meat packing, breweries, pulp, wood chips, process water, sludge and slime, waste water, white water and other applications.

AMT Sewage/Trash pumps will easily handle liquids containing sewage, stone, sticks, mud, and other solids. Minimum liquid requirement must be above 85%. Failure to do so may damage pump and void warranty. These pumps are reliable, cost effective and low maintenance. Many are readily available "Off-the-Shelf" for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.

Cast Iron Construction
Silicon Carbide/viton® Mechanical Seal
2", 3" & 4" NPT Port Sizes
Self-Priming up to 20 ft.
Maximum Temperature 180º F
Maximum Working Pressure 150 PSI
Stainless Steel Semi-open, Clog Resistant Impeller
Buna-N Check Valve & O-Ring
Removable Cast Iron Volute/ Wear plate
Easy Cleanout Design
Pull-from-Rear Design
3" & 4" Models Feature Front Cleanout
Available with 3 to 15 HP Totally Enclosed Fan Cooled (TEFC) Electric Motors
Single and Three Phase, 3450 RPM Motors
Seal Flush Port Provided on 5 HP and Larger
Optional Mounting Base Available

Specifications · Features

Specifications

Manufacturer

American Machine and Tool Company

Model #

316B-95

Curve

Phase

Enclosure Rating

TEFC

Motor Frame

56J

Voltage at 60 Hz¹

230 V

Full Load Current

16 A

Solids Handling

1 in

Power

3 hp

Inlet Size

2 in

Porting Position

2 in

Width

9 in
236.22 mm

Seal Material

Silicon Carbide/Viton

Self-Priming

20 ft

Temperature

180 ºF

RPM

3450 rpm

Electric supply for ALL motors must be within ±10% of nameplate voltage rating

Weight

42.64
94
94 lbs

Length

20 in
515.62 mm

Height

9 in
223.52 mm

SKU

AT316B95SP

Customs Code

HTS Code 8413702015

¹ 3-Phase motors can operate on 50 Hz. (This will change Full Load Amps, Service Factor, RPM and Priming Capabilities)

Features

Cast Iron Construction for Abrasive Resistance and Durability
Self-cleaning Stainless Steel Impellers Resist Clogging and Wear
Pull-from-Rear Design Permits Clean Out and Repair Without Removing Piping
Silicon Carbide/Viton Mechanical Seal
Built in Buna-N Check Valve
Buna-N O-Ring Casing Seal Reusable After Clean Out Maintenance
Replaceable Cast Iron Volute/Wear plate Designed for Solids Handling
Motor Includes Stainless Steel Shaft or Stainless Steel Shaft Sleeve
3" & 4" Models Feature Front Cleanout
Available with 3 to 15 HP Totally Enclosed Fan Cooled (TEFC) Electric Motors
Single and Three Phase, 3450 RPM Motors
Optional Mounting Base Available for 184/215 JM Frames

DOWNLOADS


		amt-SPE-17-18-sp.pdf (PDF, 0KB)

		amt-394E-250-00-sp.pdf (PDF, 0KB)

Item # 316B-95, 2" NPT Sewage/Trash Pump