Springer Pumps, LLC.
Mailing: PO Box 269, Telford, PA 18969
Shipping: 861 Tech Drive, Telford, PA 18969

Int'l: 267-404-2910
Toll Free: 866-777-6060
Toll Free Fax: 866-777-6383
Email: info@springerpumps.com
Website: www.springerpumps.com
Print Back
AMT Sprinkler/Booster pumps feature 300 Series Investment Cast Stainless Steel closed impellers for high efficiency and resistance against erosion caused by abrasive particles. All models self-prime to 20 ft. Single stage models feature dual volute design to reduce radial load on motor and a built-in check valve to insure fast priming after initial liquid is added to the pump. Cast iron construction provides durability and low maintenance. Easy cleanout design includes replaceable dual volute/ diffuser and casing O-ring for servicing. Two-stage models provide additional pressure in fractional horsepower sizes for multi-sprinkler head applications. Type 21 mechanical seals handle maximum working pressure to 150 PSI. Pumps are available from 3/4 to 7-1/2 HP with Open Drip Proof (ODP) or Totally Enclosed Fan Cooled (TEFC) motors. (See Dimensional chart for specific model availability).

AMT Sprinkler/Booster pumps are readily available “Off-the-Shelf” for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.
  • Cast Iron Construction with 300 Series Investment Cast Stainless Steel Impellers
  • Buna-N Mechanical Seal and O-Ring
  • Optional Viton® Seal, Flapper Valve and O-Ring Available on Single Stage Models
  • 1-1/2" or 2" NPT Port Sizes
  • Maximum Working Pressure 150 PSI
  • Maximum Temperature 180º F
  • Maximum Flow 157 GPM
  • Maximum Head 180 Ft.
  • Self-priming to 20 Ft.
  • Single or Two-Stage Construction
  • Single Stage Models Feature Removable Dual Volute Design
  • 3/4 to 7-1/2 HP Single or Three Phase Motors
  • ODP or TEFC Motors
Unit of Measure

Specifications

Manufacturer

 N/A American Machine and Tool Company

Curve

 N/A D

Power

 N/A 2 hp

Phase

 N/A 1

Enclosure Rating

 N/A TEFC
Voltage at 60 Hz1 N/A 115/230 V

Full Load Current

 N/A 22/11 A

Inlet Size

 N/A 1 1/2 in

Porting Position

 N/A 1 1/2 in

Seal Material

 N/A Buna-N

Temperature

 N/A 180 ºF

Max. Flow Rate

 N/A 157 gpm

Self-Priming

 N/A 20 ft

Motor Frame

 N/A 56J

Installed Options

 N/A Viton Flapper Valve, Mechanical Seal and O-Ring (365X-300-VO) ($127.00)Viton Flapper Valve, Mechanical Seal and O-Ring (379X-300-VO) ($147.00)

N/A Electric supply for ALL motors must be within ±10% of nameplate voltage rating

Weight

 N/A 36.29 80 80 lbs

Length

 N/A 20 in502.92 mm

Width

 N/A 9 in236.22 mm

Height

 N/A 9 in231.14 mm

N/A

  • Cast Iron Construction with 300 Series Investment Cast Stainless Steel Impellers
  • Buna-N Mechanical Seal and O-Ring
  • ODP & TEFC Motors Available on 1-1/2" NPT Single-stage Models
  • Removable/Replaceable Volute/Diffuser
  • Single Stage Models Feature Removable Dual Volute Design
  • Self-priming to 20 ft.
  • Maximum Working Pressure to 150 PSI
  • Maximum Temperature 180° F
  • "Off-the-Shelf" Availability on Many Models

SKU

 N/A AT379C95SP

Customs Code

 N/A HTS Code 8413702005
  • 1 3-Phase models can also operate on 50 Hz (This will change Full Load Amps and Service Factor, RPM and Priming Capabilities).