Springer Pumps, LLC.
Mailing: PO Box 269, Telford, PA 18969
Shipping: 861 Tech Drive, Telford, PA 18969

Int'l: 267-404-2910
Toll Free: 866-777-6060
Toll Free Fax: 866-777-6383
Email: info@springerpumps.com
Website: www.springerpumps.com
Print Back
The AMT Self-Priming Cast Iron Centrifugal pumps are designed for circulating, boosting, washdown, liquid transfer and dewatering applications. Dual volute design reduces radial load on motor. The centerline discharge feature is specifically designed to prevent vapor binding and makes for convenient piping connections. All models are fitted with self-cleaning, semi-open impellers. The units will self-prime to 20 Ft. Mounting bases feature 7/16" Mounting holes which are 6" OC (on center). Built in carrying handles offer portability.

AMT Self-Priming Cast Iron Centrifugal pumps are reliable, cost effective and low maintenance. Many are readily available "Off-the-Shelf" for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.

Viton® is a registered trademark of E.I. DuPont
  • Cast Iron Construction
  • Buna-N Mechanical Seal and O-Ring
  • Optional Viton® or Silicon Carbide Mechanical Seal and O-Ring
  • Dual Volute Design
  • 1" or 1-1/4" NPT Suction and Discharge Ports
  • Self-priming to 20 ft.
  • Maximum Working Pressure 75 PSI
  • Maximum Temperature 180º F
  • Maximum Flow 82 GPM
  • Maximum Head 70 ft.
  • Self-cleaning, Semi-open Impellers
  • 1/3 to 1-1/2 HP Open Drip Proof (ODP) or Totally Enclosed Fan Cooled (TEFC) Single or Three Phase Motors
Unit of Measure

Specifications

Manufacturer

 N/A American Machine and Tool Company

Model #

 N/A 285G-95

Curve

 N/A B

Power

 N/A 1 hp

Phase

 N/A 1

Enclosure Rating

 N/A TEFC

Voltage at 60 Hz

 N/A 115/230 V
Full Load Amps1 N/A 12/6 A

Inlet Size

 N/A 1 1/4 in

Porting Position

 N/A 1 1/4 in

Motor Frame

 N/A 56J

Shaft Seal Construction

 N/A Buna/Stainless Steel

Installed Options

 N/A Silicon Carbide/Viton Seal and O-ring Installed (285X-301-VS) ($127.00)Viton Type 6 Seal and O-Ring Installed (285X-301-VO) ($111.00)

N/A Electric supply for ALL motors must be within ±10% of nameplate voltage rating

Weight

 N/A 22.68 50 50 lbs

Length

 N/A 18 in457.20 mm

Width

 N/A 9 in223.52 mm

Height

 N/A 7 in182.88 mm

M.O.C

 N/A Cast Iron

N/A

  • Cast Iron Construction
  • Buna-N Mechanical Seal and O-Ring
  • Optional Viton® or Silicon Carbide Mechanical Seal and O-Ring
  • Dual Volute Design Reduces Radial Load on Motor
  • 1" or 1-1/4" NPT Suction and Discharge Port
  • Maximum Working Pressure 75 PSI
  • Maximum Temperature 180° F
  • Single or Three Phase, ODP or TEFC Motors Available
  • Self-cleaning, Semi-open Impellers
  • "Off-the-Shelf "Availability for Many Models

SKU

 N/A AT285G95SP

Customs Code

 N/A HTS Code 8413702005
  • 1 3-Phase models can also operate on 50 Hz (This will change Full Load Amps and Service Factor, RPM and Priming Capabilities).