Item # 285J-95, 285J-95 On Springer Pumps, LLC

The AMT Self-Priming Cast Iron Centrifugal pumps are designed for circulating, boosting, washdown, liquid transfer and dewatering applications. Dual volute design reduces radial load on motor. The centerline discharge feature is specifically designed to prevent vapor binding and makes for convenient piping connections. All models are fitted with self-cleaning, semi-open impellers. The units will self-prime to 20 Ft. Mounting bases feature 7/16" Mounting holes which are 6" OC (on center). Built in carrying handles offer portability.

AMT Self-Priming Cast Iron Centrifugal pumps are reliable, cost effective and low maintenance. Many are readily available "Off-the-Shelf" for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.

Viton® is a registered trademark of E.I. DuPont

Cast Iron Construction
Buna-N Mechanical Seal and O-Ring
Optional Viton® or Silicon Carbide Mechanical Seal and O-Ring
Dual Volute Design
1" or 1-1/4" NPT Suction and Discharge Ports
Self-priming to 20 ft.
Maximum Working Pressure 75 PSI
Maximum Temperature 180º F
Maximum Flow 82 GPM
Maximum Head 70 ft.
Self-cleaning, Semi-open Impellers
1/3 to 1-1/2 HP Open Drip Proof (ODP) or Totally Enclosed Fan Cooled (TEFC) Single or Three Phase Motors

Unit of Measure

Specifications

Manufacturer	N/A American Machine and Tool Company
Model #	N/A 285J-95
Curve	N/A B
Power	N/A 1 hp
Phase	N/A 3
Enclosure Rating	N/A TEFC
Voltage at 60 Hz	N/A 230/460 V
Full Load Amps¹	N/A 4/2 A
Inlet Size	N/A 1 1/4 in
Porting Position	N/A 1 1/4 in
Motor Frame	N/A 56J
Shaft Seal Construction	N/A Buna/Stainless Steel
Installed Options	N/A Silicon Carbide/Viton Seal and O-ring Installed (285X-301-VS) (QUOTE)Viton Type 6 Seal and O-Ring Installed (285X-301-VO) (QUOTE)
N/A Electric supply for ALL motors must be within ±10% of nameplate voltage rating
Weight	N/A 21.77 48 48 lbs
Length	N/A 17 in421.64 mm
Width	N/A 9 in223.52 mm
Height	N/A 9 in218.44 mm
M.O.C	N/A Cast Iron
N/A Cast Iron Construction Buna-N Mechanical Seal and O-Ring Optional Viton® or Silicon Carbide Mechanical Seal and O-Ring Dual Volute Design Reduces Radial Load on Motor 1" or 1-1/4" NPT Suction and Discharge Port Maximum Working Pressure 75 PSI Maximum Temperature 180° F Single or Three Phase, ODP or TEFC Motors Available Self-cleaning, Semi-open Impellers "Off-the-Shelf "Availability for Many Models
SKU	N/A AT285J95SP
Customs Code	N/A HTS Code 8413702005

¹ 3-Phase models can also operate on 50 Hz (This will change Full Load Amps and Service Factor, RPM and Priming Capabilities).

Specifications

Manufacturer

Model #

Curve

Power

Phase

Enclosure Rating

Voltage at 60 Hz

Inlet Size

Porting Position

Motor Frame

Shaft Seal Construction

Installed Options

Weight

Length

Width

Height

M.O.C

SKU

Customs Code