Springer Pumps, LLC.
PO Box 269, 861 Tech Drive, Telford,PA
18969, US
Phone: 866-777-6060
Fax: 866-777-6383
Email: info@springerpumps.com
Website: http://www.springerpumps.com
All Categories > Manufacturers Index > AMT Centrifugal, Diaphragm, and Drum Pumps > Marine/Utility/HVAC Pumps > Cast Iron Sewage & Trash Pumps > Item # 393A-95  


Image

Item # 393A-95, 2" NPT Sewage/Trash Pump
Unit Price QUOTE

AMT Cast Iron Sewage/Trash pumps are designed for trouble free and economical handling of solids laden liquids and slurries. Pumps are available in three NPT port sizes; 2", 3" and 4". Cast iron construction with 2 vane Stainless Steel self-cleaning impellers, Silicon Carbide mechanical seals for abrasion resistance and Buna-N O-rings and check valves. Built-in check valve allows pump to reprime automatically in an open system, without a foot valve. The solids handling capabilities of the pumps make them ideally suited for a variety of industrial applications including: sewage treatment, canneries, chemical processing, wineries, tanneries, meat packing, breweries, pulp, wood chips, process water, sludge and slime, waste water, white water and other applications.

AMT Sewage/Trash pumps will easily handle liquids containing sewage, stone, sticks, mud, and other solids. Minimum liquid requirement must be above 85%. Failure to do so may damage pump and void warranty. These pumps are reliable, cost effective and low maintenance. Many are readily available "Off-the-Shelf" for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.
  • Cast Iron Construction
  • Silicon Carbide/viton® Mechanical Seal
  • 2", 3" & 4" NPT Port Sizes
  • Self-Priming up to 20 ft.
  • Maximum Temperature 180º F
  • Maximum Working Pressure 150 PSI
  • Stainless Steel Semi-open, Clog Resistant Impeller
  • Buna-N Check Valve & O-Ring
  • Removable Cast Iron Volute/ Wear plate
  • Easy Cleanout Design
  • Pull-from-Rear Design
  • 3" & 4" Models Feature Front Cleanout
  • Available with 3 to 15 HP Totally Enclosed Fan Cooled (TEFC) Electric Motors
  • Single and Three Phase, 3450 RPM Motors
  • Seal Flush Port Provided on 5 HP and Larger
  • Optional Mounting Base Available





Specifications  · Features

Specifications

Manufacturer
American Machine and Tool Company

Model #
393A-95

Curve
D

Phase
3

Enclosure Rating
TEFC

Motor Frame
184JM

Voltage at 60 Hz1
230/460 V

Full Load Current
17/9 A

Solids Handling
1 in

Power
5 hp

Inlet Size

 View
2 in

Porting Position

 View
2 in

Width
12 in
312.42 mm

Seal Material
Silicon Carbide/Viton

Self-Priming
20 ft

Temperature
180 ºF

RPM
3450 rpm
Electric supply for ALL motors must be within ±10% of nameplate voltage rating

Weight
173
78.47
173 lbs

Length
25 in
632.46 mm

Height
10 in
254.00 mm

SKU
AT393A95SP

Customs Code
HTS Code 8413702015
1 3-Phase motors can operate on 50 Hz. (This will change Full Load Amps, Service Factor, RPM and Priming Capabilities)


Features
  • Cast Iron Construction for Abrasive Resistance and Durability
  • Self-cleaning Stainless Steel Impellers Resist Clogging and Wear
  • Pull-from-Rear Design Permits Clean Out and Repair Without Removing Piping
  • Silicon Carbide/Viton Mechanical Seal
  • Built in Buna-N Check Valve
  • Buna-N O-Ring Casing Seal Reusable After Clean Out Maintenance
  • Replaceable Cast Iron Volute/Wear plate Designed for Solids Handling
  • Motor Includes Stainless Steel Shaft or Stainless Steel Shaft Sleeve
  • 3" & 4" Models Feature Front Cleanout
  • Available with 3 to 15 HP Totally Enclosed Fan Cooled (TEFC) Electric Motors
  • Single and Three Phase, 3450 RPM Motors
  • Optional Mounting Base Available for 184/215 JM Frames



Print Back