Please Note: This product is not for export.
Graco® 650202 Husky™ 1050 PP Pump, BLDC Motor, End Flange, SS Center Section, PVDF Seats, PTFE Balls & PTFE/SP Diaphragm
Maximum Operating Temperature (°F): 104
Minimum Operating Temperature (°F): 32
Minimum Storage Temperature (°F): 32
Maximum Storage Temperature (°F): 104
Manifold O-Ring Material: PTFE
Maximum Cycle Rate (CPM): 280
Maximum Fluid Pressure (MPa): 0.48
Maximum Fluid Pressure (psi): 70
Power Source: Electric
Maximum Motor Speed (RPM): 3600
Motor Type: Brushless DC
Power Rating (HP): 2.2
Voltage (V ac): 320
Maximum Amperage (A): 5.2
Graco® 650202 Husky™ 1050 PP Pump, BLDC Motor, End Flange, SS Center Section, PVDF Seats, PTFE Balls & PTFE/SP Diaphragm
Our Husky™ e-Series pumps are ideal for applications that require low pulsation and a smooth flow. The patented air charged drive allows for the elimination or reduction of pulsation WITHOUT expensive pulsation dampeners or surge tanks.
Maximum Operating Temperature (°F): 104
Minimum Operating Temperature (°F): 32
Minimum Storage Temperature (°F): 32
Maximum Storage Temperature (°F): 104
Manifold O-Ring Material: PTFE
Maximum Cycle Rate (CPM): 280
Maximum Fluid Pressure (MPa): 0.48
Maximum Fluid Pressure (psi): 70
Power Source: Electric
Maximum Motor Speed (RPM): 3600
Motor Type: Brushless DC
Power Rating (HP): 2.2
Voltage (V ac): 320
Maximum Amperage (A): 5.2
This item is available for domestic purchase only!
Unit of Measure
WETTED M.O.C. |
N/A Polypropylene |
Ball M.O.C. |
N/A PTFE |
Solids Handling |
N/A 0.125 in3 mm |
Fluid Inlet Size (ANSI Flange) |
N/A 1 End Flange ANSI/DIN in25 End Flange ANSI/DIN mm |
Fluid Outlet Size (ANSI Flange) |
N/A 1 End Flange ANSI/DIN in25 End Flange ANSI/DIN mm |
Height |
N/A 30 in2.50 ft762.00 mm |
M.O.C |
N/A Polypropylene |
Non-Wetted Material |
N/A Stainless Steel |
Max. Flow Rate |
N/A 42 gpm158.99 lpm |
SKU |
N/A GR650202SP |
Customs Code |
N/A
HTS Code 8413500050 Schedule B Code 8413500050 ECCN Code EAR99 |
