Heavy Duty Industrial Coolant Pumps
Coolant Pumps
The AMT Heavy Duty Industrial Coolant pump has been designed for a broad range of Industrial/Commercial coolant and recirculating applications. Back vanes on the impellers of models 4421-95 through 4443-95 balance pressure and thereby eliminate the need for mechanical seals. All models with extended shafts are fitted with aligning coupling between motor and shaft. Dual volute construction of models 4421-95 through 4443-95 eliminates radial thrust and therefore the need for bottom bearings. A Universal Mounting bracket system is included with these pumps
- Cast Iron Casing and Column
- 3/4" to 1-1/2" NPT Discharge Port
- Handles Viscosities to 500 SSU
- Includes Universal Mounting Bracket
- Dual Volute Design Reduces Radial Load on Motor
- Maximum Temperature 200ºF
- Maximum Flow 67 GPM
- Maximum Head 32 Ft.
- Self-cleaning, Semi-open Impeller
- Available with Single or Three Phase 56C Motor
- 1/8 to 3/4 HP Totally Enclosed Fan Cooled (TEFC) Motor, 1725 RPM
Unit of Measure
Items |
/Asset/a2538.jpg 4421-95 Heavy Duty Industrial Coolant Pump Unit Price $604.50
|
/Asset/a2538.jpg 4422-95 Heavy Duty Industrial Coolant Pump Unit Price $622.50
|
/Asset/a2538.jpg 4430-95 Heavy Duty Industrial Coolant Pump Unit Price $610.50
|
/Asset/a2538.jpg 4431-95 Heavy Duty Industrial Coolant Pump Unit Price $610.50
|
/Asset/a2538.jpg 4440-95 Heavy Duty Industrial Coolant Pump Unit Price $715.50
|
|||||
Manufacturer | N/A American Machine and Tool Company | |||||||||
Model # | N/A 4421-95 | N/A 4422-95 | N/A 4430-95 | N/A 4431-95 | N/A 4440-95 | |||||
Curve | N/A C | N/A C | N/A B | N/A B | N/A A | |||||
Power | N/A 1/4 hp | N/A 1/4 hp | N/A 1/3 hp | N/A 1/3 hp | N/A 3/4 hp | |||||
Phase | N/A 1 | N/A 3 | N/A 1 | N/A 3 | N/A 1 | |||||
Voltage (AC) at 60 Hz | N/A 115/230 V | N/A 230/460 V | N/A 115/230 V | N/A 230/460 V | N/A 115/230 V | |||||
Full Load Current1 | N/A 5/3 A | N/A 0.9/0.5 A | N/A 7/4 A | N/A 2/1 A | N/A 9/5 A | |||||
Porting Position |
N/A 1 1/4 in | N/A 1 1/4 in | N/A 1 1/4 in | N/A 1 1/4 in | N/A 1 1/2 in | |||||
Temperature | N/A 200 ºF | |||||||||
Max. Flow Rate | N/A 67 gpm | |||||||||
Shaft Seal Construction | N/A Stainless Steel | |||||||||
Note | N/A Electric supply for ALL motors must be within ±10% of nameplate voltage rating | |||||||||
M.O.C | N/A Cast Iron | |||||||||
|