Exit
Think Pumps ~ Think SpringerPhone: 866-777-6060|| |Search
Menu

This line of AMT Self-priming Centrifugal pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-cleaning clog resistant impeller capable of handling up to 3/8" diameter semi-solids. Built in flapper/check valves enable consistent self-priming to 20 ft. Dual volute design reduces radial load on motor. Stainless Steel models are especially effective in applications where rust and/or corrosion can develop in systems and also are highly resistant to erosion and chemicals. Cast Iron models offer durability, high quality and value that continue to set the standard in the industry.

AMT Centrifugal pumps are reliable, cost effective and low maintenance. Many are readily available "Off-the-Shelf" for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.
  • 300 Series Investment Cast Stainless Steel
    Construction with Viton® Seals;
    Maximum Temperature 200 ºF
  • Cast Iron Construction with Buna-N Seals;
    Maximum Temperature 180 ºF
  • Optional Silicon Carbide Seals Available
  • 1-1/2" and 2" NPT Port Sizes
  • Self-Priming up to 20 Ft.
  • Maximum Working Pressure 75 PSI
  • Maximum Flow 150 GPM
  • Maximum Head 102 Ft. (44 PSI)
  • Dual Volute Design
  • Self-cleaning, Clog Resistant Impeller
  • Built In Check Valve
  • Available with Open Drip Proof (ODP) or Totally Enclosed Fan Cooled (TEFC) Motors
  • 1/2 to 3 HP 56J Single and Three Phase, 3450 RPM Motors
Unit of Measure
Items
Model 2761-95

Self-Priming Centrifugal Pump
Unit Price $587.25

Model 2761-95

Self-Priming Centrifugal Pump
Unit Price $618.00

Model 2761-95

Self-Priming Centrifugal Pump
Unit Price $670.50

Model 2761-95

282F-95
Unit Price $685.50

Model 2761-95

Self-Priming Centrifugal Pump
Unit Price $707.25
Manufacturer N/A American Machine and Tool Company
Model # N/A 2827-95 N/A 2825-95 N/A 282D-95 N/A 282F-95 N/A 282C-95
Curve N/A G N/A F N/A G N/A G N/A F
Power N/A 1/2 hp N/A 3/4 hp N/A 3/4 hp N/A 3/4 hp N/A 1 hp
Phase N/A 1 N/A 1 N/A 1 N/A 3 N/A 1
Voltage at 60 Hz1 N/A 115/230 V N/A 115/230 V N/A 115/230 V N/A 230/460 V N/A 115/230 V
Full Load Current N/A 10/5 A N/A 13/7 A N/A 9/5 A N/A 3/2 A N/A 12/6 A
Inlet Size
N/A 1 1/2 in
Porting Position
N/A 1 1/2 in
Temperature N/A 180 ºF
Self-Priming N/A 20 ft
Max. Flow Rate N/A 150 gpm
Solids Handling N/A 3/8 in
Installed Options N/A Silicon Carbide/Viton Seal and Viton Check Valve Installed (276X-300-VS) ($142.00)Silicon Carbide/Viton Seal and Viton Check Valve Installed (282X-300-VS) ($142.00)
Note N/A Electric supply for ALL motors must be within ±10% of nameplate voltage rating
  • 1 3-Phase motors can also operate on 50 Hz. (This will change Full Load Amps, Service Factor, RPM and Priming Capabilities)
^