AMT® Cast Iron Sewage/Trash Pumps are designed for trouble free and economical handling of solids laden liquids and slurries. Cast iron construction with two vane stainless steel self-cleaning impellers, silicon carbide mechanical seals for abrasion resistance and Buna-N o-rings and check valves. The built-in check valve allows pump to re-prime automatically in an open system without the foot valve. The solids handling capabilities of the pumps make them ideally suited for a variety of industrial applications including: sewage treatment, canneries, chemical processing, wineries, tanneries, meat packing, breweries, pulp, wood chips, process water, sludge and slime, waste water, white water and other applications. These sewage/trash pump will easily handle liquids containing sewage, stones, sticks, mud and other solids. Buna-N o-ring casing seal is re-usable after clean out maintenance. Self-cleaning stainless steel impeller resists clogging and wear. Front clean-out and additional pull-from-rear design permits clean out and repair without removing piping.
Features:
- Cast iron construction
- SiC/SiC seal with Viton® elastomers
- Stainless steel semi-open, clog resistant impeller
- Buna-N check valve and o-ring
- Self-priming to 20 Ft. with built-in check valve
- Removable cast iron volute/wearplate
- Easy clean-out design
- Pull-from-rear design
- Totally Enclosed Fan Cooled (TEFC) motor
Note: Minimum liquid requirement must be above 85% with a maximum of 15% solids. Failure to do so may damage pump & void warranty.
Interchangeable with Grainger Part # 4XX83
* AMT® 394H-95Identical specs and alternate to AMT® 394B-95
Specifications
Manufacturer |
N/A American Machine and Tool Company |
Model # |
N/A 394H-95 |
Curve |
N/A C |
Phase |
N/A 1 |
Enclosure Rating |
N/A TEFC |
Motor Frame |
N/A 215JM |
Voltage at 60 Hz1 | N/A 230 V |
Full Load Current |
N/A 31 A |
Solids Handling |
N/A 1 1/2 in |
Power |
N/A 7.5 hp |
Inlet Size |
N/A 3 in |
Porting Position |
N/A 3 in |
Width |
N/A 16 in393.70 mm |
Seal Material |
N/A Silicon Carbide/Viton |
Self-Priming |
N/A 20 ft |
Temperature |
N/A 180 ºF |
RPM |
N/A 3450 rpm |
N/A Electric supply for ALL motors must be within ±10% of nameplate voltage rating |
|
Weight |
N/A 133.81 295 248 lbs |
Length |
N/A 31 in789.94 mm |
Height |
N/A 13 in317.5 mm |
SKU |
N/A AT394H95SP |
Customs Code |
N/A
HTS Code 8413702005 |
Features
Features |
N/A
|
- 1 3-Phase motors can operate on 50 Hz. (This will change Full Load Amps, Service Factor, RPM and Priming Capabilities)