Exit
Think Pumps ~ Think SpringerPhone: 866-777-6060|| |Search
Menu

Request Information
AMT® 12DC-95 12 Volt DC High Head Straight Centrifugal Washdown Cast Iron Pump
Model Changed to 12DC-95 From 489G-95

AMT® 12 Volt DC Washdown pumps are designed for OEM, septic service, pumper and marine applications requiring a DC motor. The motor has a one hour duty rating and is furnished with a stainless steel shaft. This washdown duty pump is available in a variety of construction and seal materials to meet your specifications. Pull-from-rear design for easy servicing without disturbing any piping. High efficiency impeller maximizes performance. Pumps are not self-priming and require flooded suction. Premium 12 Volt DC washdown duty motors are built to handle high pressure washdown and damp/wet environments. The motor features epoxy paint, condensate drains, interior coating to protect against moisture or corrosion, special shaft seals to retard water, 12 Volt DC stud connections with o-ring seals, oversized brushes assuring longer brush life and base mount. Units are not submersible in liquids.

<Features:

  • 300 Series Investment Cast Stainless Steel and Cast Iron with Stainless Steel Impeller Construction
  • Viton® Mechanical Seal and O-Ring with Stainless Steel Models
  • Buna-N Mechanical Seal and O-Ring with Cast Iron Models
  • Discharge Port Rotates in 90° Increments
  • (4) Front Drain Plugs
  • Maximum Flow 56 GPM
  • Maximum Head 80 Ft. (35 PSI)
  • High Efficiency Closed Impeller
  • 7/8 HP 12 Volt DC Premium Washdown Duty Motor forSevere and Damp/Wet Operating Conditions

See Add On Accessory AMT® A201-90 Mounting Base Not Included Sold Separately
Unit of Measure

Specifications

Manufacturer

 N/A American Machine and Tool Company

Inlet Size

 N/A 1.5 in

Max. Flow Rate

 N/A 56 gpm

Power

 N/A 7/8 hp

Voltage (DC) at 60 Hz

 N/A 12V DC V

Weight

 N/A 25.85 Kilogram25.85 kg57 lbs

Length

 N/A 16 Inch39.37 Centimeter1.29 ft16 in0.3937 m393.70 mm

Width

 N/A 8 Inch8 in0.2007 m200.66 mm

Height

 N/A 9 in215.90 mm

M.O.C

 N/A Cast Iron

N/A

  • 300 Series Investment Cast Stainless Steel and Cast Iron with Stainless Steel Impeller Construction
  • Viton® Mechanical Seal and O-Ring with Stainless Steel Models
  • Buna-N Mechanical Seal and O-Ring with Cast Iron Models
  • Discharge Port Rotates in 90° Increments
  • (4) Front Drain Plugs
  • Maximum Flow 56 GPM
  • Maximum Head 80 Ft. (35 PSI)
  • 7/8 HP 12 Volt DC Premium Washdown Duty Motor for Severe and Damp/Wet Operating Conditions

SKU

 N/A AT12DC95SP

Curves


Performance Curves

Dimensions


Dimensions

^