Exit
Think Pumps ~ Think SpringerPhone: 866-777-6060|| |Search
Menu

HOLIDAY HOURS: CLOSED DEC 24 (PM), DEC 25-27, DEC 31 (PM) & JAN 1. OPEN DEC 30 & JAN 2.

Request Information
This line of AMT Straight Centrifugal pumps is designed for continuous-duty low pressure OEM, Industrial/Commercial and General Service applications including circulation, chemical processing, liquid transfer and cooling. These durable and compact pumps are available in a variety of construction and seal materials to meet your specification. The line also features a wide selection of single and three phase ODP or TEFC motors, up to 2 horsepower. All models feature Type 6 mechanical seals and O-rings. Pull-from-the-rear design for easy service without disturbing any piping. Self-cleaning impellers to prevent clogging and minimize maintenance.

AMT Centrifugal pumps are reliable, cost effective and low maintenance. Many are readily available "Off-the Shelf" for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.

Viton® is a registered trademark of E.I. DuPont
  • Available in : 300 Series Investment Cast Stainless Steel, Cast Bronze and Cast Iron with Stainless Steel Impeller Construction
  • Viton® Mechanical Seal and O-Ring with Stainless Steel and Bronze Models
  • Buna-N Mechanical Seal and O-Ring with Cast Iron Models
  • Optional Silicon Carbide Mechanical Seals Available
  • Discharge Port Rotates in 90º Increments
  • Maximum Working Pressure 75 PSI
  • Max. Temperature 200ºF
  • Max. Flow 90 GPM
  • Max. Head 65 Ft. (28 PSI)
  • Self-cleaning, Semi-open Impellers
  • Available with Open Drip Proof (ODP) or Totally Enclosed Fan Cooled (TEFC) 56J Motors
  • 1/3 HP to 2 HP Single and Three Phase, 3450 RPM Motors
Unit of Measure

Specifications

Manufacturer

 N/A American Machine and Tool Company

Model #

 N/A 369C-95

Curve

 N/A F

Power

 N/A 1 hp

Phase

 N/A 1

Enclosure Rating

 N/A TEFC
Voltage (AC) at 60 Hz1 N/A 115/230 V

Full Load Current

 N/A 12/6 A

Inlet Size

 N/A 1 1/4 in

Porting Position

 N/A 1 in

Max. Flow Rate

 N/A 90 gpm

Seal Material

 N/A Buna-N

Temperature

 N/A 180 ºF

Motor Frame

 N/A 56J

Installed Options

 N/A Silicon Carbide/Viton Seal and O-Ring Installed (368X-301-VS) (QUOTE)Silicon Carbide/Viton Seal and O-Ring Installed (369X-300-VS) (QUOTE)Silicon Carbide/Viton Seal and O-Ring Installed (370X-301-VS) (QUOTE)

N/A Electric supply for ALL motors must be within ±10% of nameplate voltage rating

Weight

 N/A 18.14 40 40 lbs

Length

 N/A 14 in353.06 mm

Width

 N/A 9 in223.52 mm

Height

 N/A 9 in218.44 mm

M.O.C

 N/A Cast Iron

N/A

  • Stainless Steel, Bronze & Cast Iron Construction
  • Buna-N or Viton® Mechanical Seals and O-Rings Depending on Model
  • Stainless Steel Hardware
  • NEMA 56J ODP & TEFC Single and Three Phase Motors
  • Stainless Steel Motor Shaft
  • NEMA Base Mounted Motor
  • Self-cleaning Impeller
  • Discharge Rotates in 90º Increments
  • Maximum Working Pressure to 75 PSI
  • Max. Temperature 200ºF(Viton®), 180ºF (Buna-N)
  • Front Drain Plug
  • "Off-the-Shelf" Availability for Many Models

SKU

 N/A AT369C95SP

Customs Code

 N/A HTS Code 8413702005
  • 1 3-Phase motors can also operate on 50 Hz. (This will change Full Load Amps, Service Factor and RPM)
^