Exit
Think Pumps ~ Think SpringerPhone: 866-777-6060|| |Search
Menu

This line of AMT Self-priming Centrifugal pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-cleaning clog resistant impeller capable of handling up to 3/8" diameter semi-solids. Built in flapper/check valves enable consistent self-priming to 20 ft. Dual volute design reduces radial load on motor. Stainless Steel models are especially effective in applications where rust and/or corrosion can develop in systems and also are highly resistant to erosion and chemicals. Cast Iron models offer durability, high quality and value that continue to set the standard in the industry.

AMT Centrifugal pumps are reliable, cost effective and low maintenance. Many are readily available "Off-the-Shelf" for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.
  • 300 Series Investment Cast Stainless Steel
    Construction with Viton® Seals;
    Maximum Temperature 200ºF
  • Cast Iron Construction with Buna-N Seals;
    Maximum Temperature 180º F
  • Optional Silicon Carbide Seals Available
  • 1-1/2" and 2" NPT Port Sizes
  • Self-Priming up to 20 Ft.
  • Maximum Working Pressure 75 PSI
  • Maximum Flow 150 GPM
  • Maximum Head 102 Ft. (44 PSI)
  • Dual Volute Design
  • Self-cleaning, Clog Resistant Impeller
  • Built In Check Valve
  • Available with Open Drip Proof (ODP) or Totally Enclosed Fan Cooled (TEFC) Motors
  • 1/2 to 3 HP 56J Single and Three Phase, 3450 RPM Motors
Unit of Measure

Specifications

Manufacturer

N/A American Machine and Tool Company

Model #

N/A 2875-95

Curve

N/A B

Inlet Size

N/A 3 in

Porting Position

N/A 3 in

Power

N/A 5 hp

Phase

N/A 3

Motor Frame

N/A 184JM

Seal Material

N/A Buna-N

Solids Handling

N/A 3/8 in

Temperature

N/A 180 ºF

Max. Flow Rate

N/A 375 gpm

Self-Priming

N/A 20 ft

Enclosure Rating

N/A TEFC
Voltage at 60 Hz1 N/A 230/460 V

Installed Options

N/A Silicon Carbide/Viton Seal, O-Ring and Flapper Valve Installed (287X-300-VS) ($147.00)Viton Seal, O-Ring and Flapper Valve Installed (287X-300-V0) ($189.00)

N/A Electric supply for ALL motors must be within ±10% of nameplate voltage rating

Weight

N/A 173 78.47 173 lbs

Length

N/A 27 in675.64 mm

Width

N/A 12 in304.80 mm

Height

N/A 12 in299.72 mm

N/A

  • Cast Iron construction with Bronze Impeller
  • Buna-N Mechanical Seal and O-Ring
  • Optional Viton® Mechanical Seal and Flapper Valve Available
  • Optional Silicon Carbide Seal Available
  • 3" NPT Suction and Discharge Ports
  • Stainless Steel Shaft Sleeve
  • Dual Volute Design Reduces Radial Load on Motor
  • Fill and Drain Plug for Easy Servicing
  • Maximum Working Pressure 125 PSI
  • Maximum Temperature 180° F
  • Maximum Flow 375 GPM
  • Maximum Head 110 ft.
  • Self-cleaning, Semi-open Impellers
  • 3 to 7-1/2 HP Three Phase, 184JM, Totally Enclosed Fan Cooled (TEFC) Motors
  • 3 & 5 HP Single Phase, 184JM, Totally Enclosed Fan Cooled (TEFC) Motors
  • "Off-the-Shelf" Availability on Many Models
  • Optional Mounting Base Available on All Above Models

SKU

N/A AT287595SP

Customs Code

N/A HTS Code 8413702015
  • 1 3-Phase models can also operate on 50 Hz (This will change Full Load Amps and Service Factor, RPM and Priming Capabilities).
^