AMT 300 Series Investment cast Stainless Steel Transfer pumps are designed to handle liquids and chemicals with specific gravities to 1.6. The pumps are particularly well suited to applications involving perchloroethylene (PCE) and are recommended for use with non-flammable liquids. These pumps are fitted with Viton® mechanical seal and O-ring. Self-priming to 6 Ft.

AMT Stainless Steel Transfer pumps are reliable, cost effective and low maintenance. Many are readily available “Off-the-Shelf” for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.

• 300 Series Investment Cast Stainless Steel Construction
• Viton® Mechanical Seal and O-Ring
• Handles Liquids and Chemicals with Specific Gravities up to 1.6
• 1" NPT Suction and Discharge Ports
• Maximum Working Pressure 75 PSI
• Maximum Temperature 200° F
• Maximum Flow 66 GPM
• Maximum Head 68 ft.
• Self-priming to 6 ft.
• Self-cleaning, Semi-open Impeller
• Available with Open Drip Proof (ODP) or Totally Enclosed Fan Cooled (TEFC) Motor
• 1/3 to 2 HP Single or Three Phase Motor

The AMT Self-Priming Cast Iron Centrifugal pumps are designed for circulating, boosting, washdown, liquid transfer and dewatering applications. Dual volute design reduces radial load on motor. The centerline discharge feature is specifically designed to prevent vapor binding and makes for convenient piping connections. All models are fitted with self-cleaning, semi-open impellers. The units will self-prime to 20 Ft. Mounting bases feature 7/16" Mounting holes which are 6" OC (on center). Built in carrying handles offer portability.

AMT Self-Priming Cast Iron Centrifugal pumps are reliable, cost effective and low maintenance. Many are readily available "Off-the-Shelf" for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.

Viton® is a registered trademark of E.I. DuPont

• Cast Iron Construction
• Buna-N Mechanical Seal and O-Ring
• Optional Viton® or Silicon Carbide Mechanical Seal and O-Ring
• Dual Volute Design
• 1" or 1-1/4" NPT Suction and Discharge Ports
• Self-priming to 20 ft.
• Maximum Working Pressure 75 PSI
• Maximum Temperature 180º F
• Maximum Flow 82 GPM
• Maximum Head 70 ft.
• Self-cleaning, Semi-open Impellers
• 1/3 to 1-1/2 HP Open Drip Proof (ODP) or Totally Enclosed Fan Cooled (TEFC) Single or Three Phase Motors

AMT Self-Priming 300 Series Stainless Steel or Bronze Centrifugal pumps are designed for a wide range of applications including chemical processes, waste water treatment and pumping agriculture fertilizers/ fumigants. All models are equipped with Totally Enclosed Fan Cooled (TEFC) motors. 300 Series Stainless Steel models are fitted with Teflon® mechanical seal and O-ring, while Bronze models come standard with Viton® mechanical seal and O-ring. Pumps are self-priming to 6 ft. All pumps are designed to handle viscosities to 100 SSU and select models handle specific gravities to 1.3.

AMT Self-Priming 300 Stainless Steel or Bronze Centrifugal pumps are reliable, cost effective and low maintenance. Many are readily available “Off-the-Shelf” for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.

• Available in: Bronze or 300 Series Investment Cast Stainless Steel Construction with 300 Series Stainless Steel Impeller
• Viton® or Teflon® Mechanical Seal and O-Ring
• 1-1/2" NPT Suction & Discharge Ports
• Maximum Working Pressure 75 PSI
• Maximum Temperature
  Bronze 200º F
  Stainless Steel 250º F
• Maximum Flow 132 GPM
• Maximum Head 63 Ft.
• Self-priming to 6 Ft.
• Self-cleaning, Semi-open Impellers
• Totally Enclosed Fan Cooled (TEFC) Motors
• 3/4 to 2 HP Single or Three Phase Motors

AMT 2” Self Priming High Pressure Pumps are self-priming high pressure booster pumps with a two stage impeller design to provide additional pressure. All models feature cast iron construction with aluminum impellers and Viton Mechanical Seals. Built-in EPR/EPDM check valve for fast priming are standard on all units. Fill and drain plugs for easy installation and servicing. These units are self-priming up to 20 feet and are suitable for high pressure applications such as dewatering, sprinkler/booster, irrigation, and fire protection. Units are close coupled and are available in 7-1/2 to 10 horsepower TEFC electric motors.

• Cast Iron Construction with Aluminum Impeller
• Viton Mechanical Seal with EPR/EPDM Check Valve and O-Rings
• 2” NPT Suction and Discharge Ports
• Maximum Temperature 180° F
• Maximum Flow 122 GPM
• Max Head 270 Ft. (116 psi)
• Self-Priming to 20 Ft.
• Closed Vane Aluminum Impeller Designed for High Pressure Performance
• 7-1/2 to 10 HP TEFC, Single and Three Phase Motors
• For Optional Mounting Base Available See A200-90

Model 81 1/P47A is designed for applications in manufacturing basic products: batch mixing, hot or cold, agitation and recirculation, transfer and transport and application to soil. The Valox® construction and Viton® seal material make this pump ideally suited for handling nitrogen solutions, clear mixes, suspensions and slurries, fertilizers with additives such as herbicides, insecticides, trace elements and micronutrients. The semi-open Valox® impeller handles solids to 9/16" diameter. Replaceable vane plate and flow guide. Pump available in single or three phase and includes a strainer

Viton® is a registered trademark of DuPont

Valox® is a registered trademark of General Electric

• Valox® 420 Construction
• Valox® 420 Impeller Handles 9/16" Solids
• 1-1/2" NPT Suction and Discharge Ports
• 2 HP TEFC Motor Available in Single or Three Phase
• Stainless Steel No. 416 Impeller Shaft
• Replaceable Vane Plate, Valox® 420
• Replaceable Flow Guide, Valox® 420
• Maximum Suction Lift is 20 Ft.
• Maximum Operating Pressure is 26 PSI
• Maximum Temperature is 160º F
• viton® ® Mechanical Seal
• Stainless Steel No. 18-8 Hardware

This line of AMT Self-priming Centrifugal pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-cleaning clog resistant impeller capable of handling up to 3/8" diameter semi-solids. Built in flapper/check valves enable consistent self-priming to 20 ft. Dual volute design reduces radial load on motor. Stainless Steel models are especially effective in applications where rust and/or corrosion can develop in systems and also are highly resistant to erosion and chemicals. Cast Iron models offer durability, high quality and value that continue to set the standard in the industry.

AMT Centrifugal pumps are reliable, cost effective and low maintenance. Many are readily available "Off-the-Shelf" for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.

• 300 Series Investment Cast Stainless Steel
  Construction with Viton® Seals;
  Maximum Temperature 200ºF
• Cast Iron Construction with Buna-N Seals;
  Maximum Temperature 180º F
• Optional Silicon Carbide Seals Available
• 1-1/2" and 2" NPT Port Sizes
• Self-Priming up to 20 Ft.
• Maximum Working Pressure 75 PSI
• Maximum Flow 150 GPM
• Maximum Head 102 Ft. (44 PSI)
• Dual Volute Design
• Self-cleaning, Clog Resistant Impeller
• Built In Check Valve
• Available with Open Drip Proof (ODP) or Totally Enclosed Fan Cooled (TEFC) Motors
• 1/2 to 3 HP 56J Single and Three Phase, 3450 RPM Motors

This line of AMT Self-priming Centrifugal pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-cleaning clog resistant impeller capable of handling up to 3/8" diameter semi-solids. Built in flapper/check valves enable consistent self-priming to 20 ft. Dual volute design reduces radial load on motor. Stainless Steel models are especially effective in applications where rust and/or corrosion can develop in systems and also are highly resistant to erosion and chemicals. Cast Iron models offer durability, high quality and value that continue to set the standard in the industry.

AMT Centrifugal pumps are reliable, cost effective and low maintenance. Many are readily available "Off-the-Shelf" for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.

• 300 Series Investment Cast Stainless Steel
  Construction with Viton® Seals;
  Maximum Temperature 200ºF
• Cast Iron Construction with Buna-N Seals;
  Maximum Temperature 180º F
• Optional Silicon Carbide Seals Available
• 1-1/2" and 2" NPT Port Sizes
• Self-Priming up to 20 Ft.
• Maximum Working Pressure 75 PSI
• Maximum Flow 150 GPM
• Maximum Head 102 Ft. (44 PSI)
• Dual Volute Design
• Self-cleaning, Clog Resistant Impeller
• Built In Check Valve
• Available with Open Drip Proof (ODP) or Totally Enclosed Fan Cooled (TEFC) Motors
• 1/2 to 3 HP 56J Single and Three Phase, 3450 RPM Motors

This line of AMT Self-priming Centrifugal pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-cleaning clog resistant impeller capable of handling up to 3/8" diameter semi-solids. Built in flapper/check valves enable consistent self-priming to 20 ft. Dual volute design reduces radial load on motor. Stainless Steel models are especially effective in applications where rust and/or corrosion can develop in systems and also are highly resistant to erosion and chemicals. Cast Iron models offer durability, high quality and value that continue to set the standard in the industry.

AMT Centrifugal pumps are reliable, cost effective and low maintenance. Many are readily available "Off-the-Shelf" for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.

• 300 Series Investment Cast Stainless Steel
  Construction with Viton® Seals;
  Maximum Temperature 200 ºF
• Cast Iron Construction with Buna-N Seals;
  Maximum Temperature 180 ºF
• Optional Silicon Carbide Seals Available
• 1-1/2" and 2" NPT Port Sizes
• Self-Priming up to 20 Ft.
• Maximum Working Pressure 75 PSI
• Maximum Flow 150 GPM
• Maximum Head 102 Ft. (44 PSI)
• Dual Volute Design
• Self-cleaning, Clog Resistant Impeller
• Built In Check Valve
• Available with Open Drip Proof (ODP) or Totally Enclosed Fan Cooled (TEFC) Motors
• 1/2 to 3 HP 56J Single and Three Phase, 3450 RPM Motors