Please Note: This product is not for export.
Graco® 25A672 SaniForce™ 1040e EODD Pump Cart System with 120 V Compressor, S/S Center & Seats, PTFE Balls & Manifold O-Rings & PTFE/EPDM Overmold Diaphragm
Maximum Operating Temperature (°F): 104
Minimum Operating Temperature (°F): 32
Minimum Storage Temperature (°F): 32
Maximum Storage Temperature (°F): 104
Manifold O-Ring Material: PTFE
Maximum Cycle Rate (CPM): 280
Maximum Fluid Pressure (MPa): 0.48
Maximum Fluid Pressure (psi): 70
Power Source: Electric
Maximum Motor Speed (RPM): 3600
Motor Type: Brushless DC
Power Rating (HP): 2.2
Voltage (V ac): 320
Graco® 25A672 SaniForce™ 1040e EODD Pump Cart System with 120 V Compressor, S/S Center & Seats, PTFE Balls & Manifold O-Rings & PTFE/EPDM Overmold Diaphragm
The SaniForce™ 1040e combine all of the benefits of a traditional air operated diaphragm pump like self-priming, stalling under pressure and increased diaphragm life with the benefits of an electric pump like energy cost savings, reduced pulsation and increased pump control.
Maximum Operating Temperature (°F): 104
Minimum Operating Temperature (°F): 32
Minimum Storage Temperature (°F): 32
Maximum Storage Temperature (°F): 104
Manifold O-Ring Material: PTFE
Maximum Cycle Rate (CPM): 280
Maximum Fluid Pressure (MPa): 0.48
Maximum Fluid Pressure (psi): 70
Power Source: Electric
Maximum Motor Speed (RPM): 3600
Motor Type: Brushless DC
Power Rating (HP): 2.2
Voltage (V ac): 320
This item is available for domestic purchase only!
Unit of Measure
WETTED M.O.C. |
N/A Stainless Steel |
Ball M.O.C. |
N/A PTFE |
Solids Handling |
N/A 0.125 in3 mm |
Fluid Inlet Size (ANSI Flange) |
N/A 1.5 Tri-Clamp in38 Tri-Clamp mm |
Fluid Outlet Size (ANSI Flange) |
N/A 1.5 Tri-Clamp in38 Tri-Clamp mm |
Height |
N/A 51 in1.2954 m4.25 ft1295.40 mm |
M.O.C |
N/A Stainless Steel |
Non-Wetted Material |
N/A Stainless Steel |
Max. Flow Rate |
N/A 35 gpm132.49 lpm |
SKU |
N/A GR25A672SP |
Customs Code |
N/A
HTS Code 8413500050 Schedule B Code 8413500050 ECCN Code 2B350 |
